Choose the Right Fastener for Your Deck

When building a new deck or patio, you want to use the best materials for the project. While deciding between wood or composite decking materials may be an easier decision, choosing the right fasteners for your deck can be a bit confusing. There are a wide range of fasteners for decking to consider, so how do you know which is the best for building a deck? Which fastener will be able to withstand years of moisture and movement? After all, fasteners are what holds your patio or deck together and tend to be the most common point of failure in building a deck. Here’s a look at the different deck screws and nails available to you and what works best for building a deck.

Types of Nails for Decks

Nails are available in an astonishing array of sizes and styles. The right nail for a deck or patio all depends on the project at hand. Nails are sized by the length of their shaft, which the part that is driven into the surface, as well as the diameter of their head, the top portion that is struck to drive the nail into the material. Nails are designated by pennies, meaning nail sizes are described as 2D, 3D, etc., as the old abbreviation for pennies was a d. In addition to size, there are also:

• Common nails-  Large heads and thick shank, used most often for deck framing as they hold well but are hard to drive as they tend to split wood.
• Box nails – Same size as common nails but much thinner shank, reduced the chance of wood splitting.
• Spiral nails – Grip wood fibers, won’t work their work out and are difficult to remove.
• Finishing nails – Small, barrel heads with a slender shank, used most often for trim work.
• Casing nails – Larger versions of finishing nails which provide more holding power.

The best nails for decking are stainless steel nails as they offer the greatest resistance to rust with minimum discoloration to woods such as cedar. However, stainless steel nails are considerably more expensive than other nails. Double hot dipped galvanized nails are often the most commonly used nails for building a deck as they are more economically priced while still providing decent corrosion resistance. It’s imperative to use double hot-dipped galvanized nails rather than galvanized nails as there are some galvanizing processes which only applies an ultra-thin layer of zinc coating to the nails, which can corrode and disappear within just a few years.

There’s also aluminum deck nails which are much softer, easy to bend and will corrode once they come in contact with copper preservatives used in pressure-treated woods. For these reasons, we don’t recommend using aluminum deck nails when building a deck.

Source: https://anotheramazingdeck.com/blog/how-to-choose-the-right-fastener-for-your-deck/